GOLDfren Sintered Ceramic Carbon Metal Rear Brake Pads for Suzuki Hayabusa (1999-2007) AD016

The AD sintered compound is optimal for street bikes, dual sport, touring, trial, cruisers. This compound makes for a perfect OE replacement due to its versatility. It is recommended for riders that do not ride really hard, but do want the good stopping power of a sintered brake pad when needed. The wearing rate of this sintered compound is 20% lower than other known sintered or semi-sintered brake pads in the same category.

The AD series is designed for very low abrasive interaction with the rotor and offers quieter braking due to the ceramic composite material.

Friction materials contain metal-ceramic and typical iron; finer additives are added to the base of the iron compound to achieve optimal friction properties.

Sold in pairs for a single caliper.

FEATURES:

High static friction coefficient
Good abrasive resistance
Thermal stability up to 450°C, and even up to 700°C over a short term
Wearing rate by 20 % lower comparing with competitive sintered products of its category for common use
Low abrasive interaction with the brake rotor material
Three(3) times +/- longer operational life compared to organic and Kevlar composite Materials

RANGE OF APPLICATION:

Specifically designed for common street riding
On scooters, cruisers, street bikes and ATV
Suitable for dry and wet conditions
Could be used on off-road bikes front brakes for riders that don't ride hard

MATERIAL OPERATING PARAMETERS:

Specific pressure: P < 5.0 Mpa
Sliding speed: V < 40 m.s-1
Constant maximum temp.: 450°C
Short time maximum temp.: 700°C
Counter-surfaces: steel disks

GENERAL CHARACTERISTICS ABOUT GOLDFREN BRAKE PADS

All the GOLDfren brake pads are made with sintered metal-ceramic and ceramic-carbon friction materials
Sintered brake pads offer no brake fade when operating at high temperatures and in wet conditions
Sintered brake pads provide superior stopping power and longer life compared to other brake pad types such as: carbon organic, organic, or semi-metallic organic
Sintered brake pads are made by fusing together metallic particles under high temperatures and pressure using a pressed powdered-metal technology
GOLDfren is a pioneer in sintering, using advanced and progressive powder metallurgy methods
Designed for both wet and dry applications
Sintered brake pads deliver exceptional braking performance and durability under the most demanding conditions
All the materials used are lead and asbestos free
GOLDfren® is the brand for high-end quality aftermarket performance disc brakes
Compound series available are: AD, S3, K1, K5, K5-LX, S33, GP5, GP6, PG7
The sintered friction material is soldered to the copper lined steel backing plate, hence, separation (which can happen with organic pads) is virtually impossible

NOTES:

Replacement of brake pads should be done in dry clean conditions and preferably by a professionally qualified person. If the friction material comes in contact with oil or brake fluid and the liquid soaks into the pores of the friction material, a catastrophic decrease in friction coefficient (braking performance) could occur
Please beware that sintered brake pads require a bed-in period after installation. Allow some extra braking distance during the bed-in period.
Braking performance is significantly influenced by the quality of the braking surface of the Disc rotor; also by the age and quality of the brake fluid, and by the correct choice of complementary type of brake pad
To achieve the perfect brake effect, we recommend using GOLDfren brake pads in conjunction with GOLDfren rotors and brake lines because of its excellent quality common friction properties
Brake with the products developed by GOLDfren®

CAUTION !!

Braking effects are affected by a range of factors:
The condition and age of the brake fluid; the condition of the brake caliper; the condition and quality of the brake lines; the condition of the brake disc....

Note : Prior to check out, please click here to confirm product availability, fitment and payment methods.

GOLDfren Sintered Ceramic Carbon Metal Rear Brake Pads for Suzuki Hayabusa (1999-2007) AD016 GOLDfren Sintered Ceramic Carbon Metal Rear Brake Pads for Suzuki Hayabusa (1999-2007) AD016